Autor Thema: Kein Videosignal bei Anmeldung  (Gelesen 146 mal)

0 Mitglieder und 1 Gast betrachten dieses Thema.

Offline gerold.steiner

  • Neuling
  • *
  • Beiträge: 8
  • Karma: +0/-0
  • Desktop: Plasma 5.21.4
  • Grafikkarte: AMD Radeon RX 5500XT
  • Grafikkartentreiber: free
  • Kernel: 5.12.1-2
  • Prozessor: Ryzen 7 3700x
  • Skill: Durchschnitt
  • Zweig: stable
Kein Videosignal bei Anmeldung
« am: 14. Mai 2021, 13:59:05 »
Liebe Manjaro-Gemeinde, bei ungefähr jedem zweiten Systemstart verliert aus irgendeinem Grund der Hauptbildschirm (iiyama ProLite XB3288UHSU) das Signal in der Phase zwischen GRUB und Anmeldung und geht "schlafen".
Dieses kommt wieder erst nach Passworteingabe, indem man den Monitor aus- und wieder einschaltet. Das hat zur Folge, dass die Positionierung der Plasma-Miniprogramme auf dem Schreibtisch komplett durcheinander gebracht wird.

Sonst habe ich als Alternative, das System neu zu starten. In der Regel bekomme ich endlich wieder beidseitig den Anmeldebildschirm, aber so etwas sollte immer geschehen, nicht nur in 50% der Fälle.
Sekundäre Anzeige ist ein iiyama ProLite E2783QSU, niemals von diesem Problem betroffen.
Beide Monitore sind über DP an die Grafikkarte (im Profil hinterlegt) angeschlossen. Eine Aktualisierung auf Kernel 5.12 hat keine Verbesserung gebracht.
System samt Paketen auf dem aktuellsten Stand.
Plasma-Version könnte aktueller sein, als im Profil angegeben.

Ich wundere mich, ob das an meinem KVM liegen könnte.

Vielen Dank für die Unterstützung.

Offline gerold.steiner

  • Neuling
  • *
  • Beiträge: 8
  • Karma: +0/-0
  • Desktop: Plasma 5.21.4
  • Grafikkarte: AMD Radeon RX 5500XT
  • Grafikkartentreiber: free
  • Kernel: 5.12.1-2
  • Prozessor: Ryzen 7 3700x
  • Skill: Durchschnitt
  • Zweig: stable
Re: Kein Videosignal bei Anmeldung
« Antwort #1 am: 18. Mai 2021, 19:40:54 »
$ inxi --admin --verbosity=7 --filter --no-host --width
System:
  Kernel: 5.12.1-2-MANJARO x86_64 bits: 64 compiler: gcc v: 10.2.0
  parameters: BOOT_IMAGE=/@/boot/vmlinuz-5.12-x86_64
  root=UUID=432c8c82-bdf4-43d4-8b9c-b9cef3f21e93 rw rootflags=subvol=@ quiet
  apparmor=1 security=apparmor udev.log_priority=3
  Desktop: KDE Plasma 5.21.4 tk: Qt 5.15.2 wm: kwin_x11 vt: 1 dm: SDDM
  Distro: Manjaro Linux base: Arch Linux
Machine:
  Type: Desktop System: Gigabyte product: B450 AORUS PRO v: N/A
  serial: <filter>
  Mobo: Gigabyte model: B450 AORUS PRO-CF v: x.x serial: <filter>
  UEFI-[Legacy]: American Megatrends v: F50 date: 11/27/2019
Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 31.37 GiB used: 4.56 GiB (14.5%)
  RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU:
  Info: 8-Core model: AMD Ryzen 7 3700X bits: 64 type: MT MCP arch: Zen 2
  family: 17 (23) model-id: 71 (113) stepping: 0 microcode: 8701013 cache:
  L2: 4 MiB bogomips: 115035
  Speed: 3139 MHz min/max: 2200/3600 MHz boost: enabled Core speeds (MHz):
  1: 3139 2: 2147 3: 2167 4: 2065 5: 2194 6: 2169 7: 2091 8: 2812 9: 2065
  10: 2118 11: 2124 12: 2159 13: 2185 14: 2209 15: 2499 16: 2088
  Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
  bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy
  constant_tsc cpb cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total cqm_occup_llc
  cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid f16c flushbyasid
  fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb ibs irperf lahf_lm lbrv lm
  mba mca mce misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc
  nopl npt nrip_save nx osvw overflow_recov pae pat pausefilter pclmulqdq
  pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pni popcnt pse
  pse36 rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sev sev_es sha_ni
  skinit smap smca sme smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp
  succor svm svm_lock syscall tce topoext tsc tsc_scale umip v_vmsave_vmload
  vgif vmcb_clean vme vmmcall wbnoinvd wdt xgetbv1 xsave xsavec xsaveerptr
  xsaveopt xsaves
  Vulnerabilities: Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass
  mitigation: Speculative Store Bypass disabled via prctl and seccomp
  Type: spectre_v1
  mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional, STIBP:
  conditional, RSB filling
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: AMD Navi 14 [Radeon RX 5500/5500M / Pro 5500M]
  vendor: Micro-Star MSI driver: amdgpu v: kernel bus-ID: 09:00.0
  chip-ID: 1002:7340 class-ID: 0300
  Display: x11 server: X.Org 1.20.11 compositor: kwin_x11 driver:
  loaded: amdgpu,ati unloaded: modesetting,radeon alternate: fbdev,vesa
  display-ID: :0 screens: 1
  Screen-1: 0 s-res: 6400x2160 s-dpi: 96 s-size: 1691x571mm (66.6x22.5")
  s-diag: 1785mm (70.3")
  Monitor-1: DisplayPort-0 res: 3840x2160 hz: 60 dpi: 140
  size: 698x393mm (27.5x15.5") diag: 801mm (31.5")
  Monitor-2: DisplayPort-1 res: 2560x1440 hz: 60 dpi: 109
  size: 597x336mm (23.5x13.2") diag: 685mm (27")
  OpenGL:
  renderer: Radeon RX 5500 XT (NAVI14 DRM 3.40.0 5.12.1-2-MANJARO LLVM 11.1.0)
  v: 4.6 Mesa 21.0.3 direct render: Yes
Audio:
  Device-1: AMD Navi 10 HDMI Audio driver: snd_hda_intel v: kernel
  bus-ID: 09:00.1 chip-ID: 1002:ab38 class-ID: 0403
  Device-2: AMD Starship/Matisse HD Audio vendor: Gigabyte
  driver: snd_hda_intel v: kernel bus-ID: 0b:00.4 chip-ID: 1022:1487
  class-ID: 0403
  Sound Server-1: ALSA v: k5.12.1-2-MANJARO running: yes
  Sound Server-2: JACK v: 0.125.0 running: no
  Sound Server-3: PulseAudio v: 14.2 running: yes
  Sound Server-4: PipeWire v: 0.3.26 running: yes
Network:
  Device-1: Intel I211 Gigabit Network vendor: Gigabyte driver: igb v: kernel
  port: f000 bus-ID: 03:00.0 chip-ID: 8086:1539 class-ID: 0200
  IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter>
  IF-ID-1: br0 state: up speed: 1000 Mbps duplex: unknown mac: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
  broadcast: <filter>
  IP v6: <filter> type: noprefixroute scope: link
  WAN IP: <filter>
Bluetooth:
  Message: No bluetooth data found.
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 2.73 TiB used: 460.07 GiB (16.5%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: SanDisk model: Extreme Pro 1TB
  size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
  lanes: 4 rotation: SSD serial: <filter> rev: 101110RL scheme: GPT
  ID-2: /dev/sda maj-min: 8:0 vendor: SanDisk model: SDSSDH3 2T00
  size: 1.82 TiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
  rotation: SSD serial: <filter> rev: 30RL scheme: GPT
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 931.5 GiB size: 931.5 GiB (100.00%)
  used: 156.49 GiB (16.8%) fs: btrfs dev: /dev/nvme0n1p1 maj-min: 259:1
  label: System SSD uuid: 432c8c82-bdf4-43d4-8b9c-b9cef3f21e93
  ID-2: /home raw-size: 1.82 TiB size: 1.82 TiB (100.00%)
  used: 303.58 GiB (16.3%) fs: btrfs dev: /dev/sda1 maj-min: 8:1
  label: Data SSD uuid: 283a53d1-4db8-40cf-834a-18d17c54b5ad
  ID-3: /mnt/EFC Cloud raw-size: N/A size: 3.48 TiB used: 609.39 GiB (17.1%)
  fs: cifs dev: /dev/EFC Cloud label: N/A uuid: N/A
  ID-4: /run/timeshift/backup raw-size: 931.5 GiB size: 931.5 GiB (100.00%)
  used: 156.49 GiB (16.8%) fs: btrfs dev: /dev/nvme0n1p1 maj-min: 259:1
  label: System SSD uuid: 432c8c82-bdf4-43d4-8b9c-b9cef3f21e93
Swap:
  Alert: No swap data was found.
Unmounted:
  ID-1: /dev/nvme0n1p2 maj-min: 259:2 size: 8 MiB fs: <superuser required>
  label: N/A uuid: N/A
USB:
  Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 10 rev: 2.0
  speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 1-8:2 info: Corsair CORSAIR Lighting Node CORE type: HID
  driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 12 Mb/s power: 50mA
  chip-ID: 1b1c:0c1a class-ID: 0300 serial: <filter>
  Hub-2: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.1 speed: 10 Gb/s
  chip-ID: 1d6b:0003 class-ID: 0900
  Hub-3: 3-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0
  speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Hub-4: 3-2:2 info: Genesys Logic Hub ports: 4 rev: 2.1 speed: 480 Mb/s
  power: 100mA chip-ID: 05e3:0610 class-ID: 0900
  Hub-5: 3-4:3 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s
  power: 100mA chip-ID: 05e3:0610 class-ID: 0900
  Hub-6: 3-4.1:4 info: Generic Virtual HUB ports: 7 rev: 1.0 speed: 12 Mb/s
  power: 100mA chip-ID: 09ea:0130 class-ID: 0900
  Device-1: 3-4.1.1:5 info: Logitech RX 250 Optical Mouse type: Mouse
  driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 12 Mb/s power: 98mA
  chip-ID: 046d:c050 class-ID: 0301
  Device-2: 3-4.1.2:6 info: Cooler Master Quickfire XTi type: Keyboard,HID
  driver: hid-generic,usbhid interfaces: 3 rev: 1.1 speed: 12 Mb/s
  power: 100mA chip-ID: 2516:002e class-ID: 0300
  Device-3: 3-4.1.6:7 info: Generic Virtual HID type: Keyboard,Mouse
  driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s power: 2mA
  chip-ID: 09ea:0131 class-ID: 0301 serial: <filter>
  Hub-7: 4-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.1 speed: 10 Gb/s
  chip-ID: 1d6b:0003 class-ID: 0900
  Hub-8: 4-2:2 info: Genesys Logic USB3.0 Hub ports: 4 rev: 3.0 speed: 5 Gb/s
  chip-ID: 05e3:0620 class-ID: 0900
Sensors:
  System Temperatures: cpu: 51.8 C mobo: 0 C gpu: amdgpu temp: 48.0 C
  mem: 0.0 C
  Fan Speeds (RPM): N/A gpu: amdgpu fan: 0
Info:
  Processes: 405 Uptime: 3d 23h 34m wakeups: 3 Init: systemd v: 247
  tool: systemctl Compilers: gcc: 10.2.0 clang: 11.1.0 Packages: 1500
  pacman: 1486 lib: 417 flatpak: 7 snap: 7 Shell: Bash v: 5.1.4
  running-in: yakuake inxi: 3.3.04