Autor Thema: Firefox in Openbox startet nicht und andere Fragen  (Gelesen 3811 mal)

0 Mitglieder und 1 Gast betrachten dieses Thema.

Offline JotEs

  • Jr. Mitglied
  • **
  • Beiträge: 82
  • Dankeschön: 2 mal
  • Desktop: Xfce 4
  • Grafikkarte: Intel Haswell Integrated Graphics Controller
  • Grafikkartentreiber: free
  • Kernel: 4.4.x (x86_64) LTS
  • Prozessor: Intel Core i5-4570
  • Skill: Durchschnitt
  • Zweig: stable
Re: Firefox in Openbox startet nicht und andere Fragen
« Antwort #15 am: 20. Oktober 2013, 12:09:27 »
Wie von mir schon selbst mit htop festgestellt, brachte auch der Vorschlag von @Pig of Destiny keine Hinweise auf Prozesse, die "firefox" im Namen enthalten. Wie schon erwähnt, ich kann damit leben und danke allen für die Anregungen.

Schönen Sonntag
JotEs
Manjaro XFCE x86_64bit auf Eigenbau mit Intel Desktop Board DH87RL

Offline Ocsej

  • Held Mitglied
  • *****
  • Beiträge: 580
  • Dankeschön: 2 mal
  • Ocsej
  • Desktop: Openbox /-Laptop Openbox
  • Grafikkarte: Desktoprechner nVidia Geforce 8500 GT / Laptop ATI Mobility RADEON HD 3470
  • Grafikkartentreiber: Desktop Rechner nVidia-free / Laptop ATI-free
  • Kernel: 4.1.6-1-ARCH /-64bit
  • Prozessor: Desktop Rechner (HP) AMD 5600 / Laptop Acer Aspire 5530G QL60 1,9GHz
  • Skill: Durchschnitt
  • Zweig: ARCH /-Stable
Re: Firefox in Openbox startet nicht und andere Fragen
« Antwort #16 am: 20. Oktober 2013, 13:46:27 »
in welchem Dateien Format werden die Filme bei Youtube runtergeladen, da ich ja keinen Flash habe lade ich mir die Dateien im MP4 runter.
Kann ich diese Option auch bei cclive wählen?
Ocsej
Deutscher Manjaro IRC Channel auf Freenode #manjaro-de

ARCH /-64bit installiert.

Ocsej

Offline sam

  • Held Mitglied
  • *****
  • Beiträge: 598
  • Dankeschön: 27 mal
  • Desktop: MATE, KDE, Xfce, Openbox, Fluxbox
  • Grafikkarte: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03)
  • Grafikkartentreiber: free
  • Prozessor: Intel® Core™2 Quad CPU @ 4× 2.666GHz
  • Skill: Fortgeschritten
  • Zweig: stable
Re: Firefox in Openbox startet nicht und andere Fragen
« Antwort #17 am: 20. Oktober 2013, 14:15:07 »
@Ocsej:
Ohne Angabe von Optionsparametern lädt cclive je nach Verfügbarkeit in den Formaten webm oder mp4, in seltenen Fällen auch fli, in der höchsten verfügbaren Auflösung und Qualität. Die kann man alle mit vlc oder mplayer (ohne Flashplayer) abspielen.
Mit dem Parameter -S wird eine Liste mit den verfügbaren Streams angezeigt. Diese kannst Du dann mit dem Parameter -s manuell ansteuern. Die Zahl am Ende der Stream-Bezeichnung gibt die vertikale Auflösung an.
Beispiel:$ cclive -S http://www.youtube.com/watch?v=gHTnYfuN6E0
Checking ... .... ....... done.
fmt05_240p
fmt17_144p
fmt18_360p
fmt22_720p
fmt36_240p
fmt43_360p

$ cclive -s fmt43_360p http://www.youtube.com/watch?v=gHTnYfuN6E0
« Letzte Änderung: 20. Oktober 2013, 14:19:03 von sam »

Offline Matthias19281

  • Held Mitglied
  • *****
  • Beiträge: 748
  • Dankeschön: 22 mal
  • Desktop: OpenBox
  • Grafikkarte: Intel (Laptop) / Nvidia (PC)
  • Grafikkartentreiber: free
  • Kernel: Kernel 3.17
  • Prozessor: Pentium B940 (Laptop) / Intel Core 2 Duo 8400 (PC)
  • Skill: Fortgeschritten
  • Zweig: unstable/stable
Re: Firefox in Openbox startet nicht und andere Fragen
« Antwort #18 am: 01. November 2013, 21:57:12 »
Hallo,

wenn ich nichts übersehen habe hat niemand wiedersprochen auf deine Aussage hin alle Programme lassen sich nur über Synapse starten...

Wenn du rechts klickst sollte ein Menü erscheinen, welches dir die Möglichkeit bietet Wie gewohnt per Klick Programme zu starten.

Weiterhin hast du die Möglichkeit deine rc.xml anzupassen. Openbox und tint2 sind beide höchst anpassbar. Ich starte nahezu alle Programme über Tatstaturkürzel, hier meine rc.xml:

<?xml version="1.0" encoding="UTF-8"?>
<!-- Do not edit this file, it will be overwritten on install.
        Copy the file to $HOME/.config/openbox/ instead. -->
<openbox_config xmlns="http://openbox.org/3.4/rc" xmlns:xi="http://www.w3.org/2001/XInclude">
  <resistance>
    <strength>10</strength>
    <screen_edge_strength>20</screen_edge_strength>
  </resistance>
  <focus>
    <focusNew>yes</focusNew>
    <!-- always try to focus new windows when they appear. other rules do
       apply -->
    <followMouse>no</followMouse>
    <!-- move focus to a window when you move the mouse into it -->
    <focusLast>yes</focusLast>
    <!-- focus the last used window when changing desktops, instead of the one
       under the mouse pointer. when followMouse is enabled -->
    <underMouse>no</underMouse>
    <!-- move focus under the mouse, even when the mouse is not moving -->
    <focusDelay>200</focusDelay>
    <!-- when followMouse is enabled, the mouse must be inside the window for
       this many milliseconds (1000 = 1 sec) before moving focus to it -->
    <raiseOnFocus>no</raiseOnFocus>
    <!-- when followMouse is enabled, and a window is given focus by moving the
       mouse into it, also raise the window -->
  </focus>
  <placement>
    <policy>Smart</policy>
    <!-- 'Smart' or 'UnderMouse' -->
    <center>yes</center>
    <!-- whether to place windows in the center of the free area found or
       the top left corner -->
    <monitor>Primary</monitor>
    <!-- with Smart placement on a multi-monitor system, try to place new windows
       on: 'Any' - any monitor, 'Mouse' - where the mouse is, 'Active' - where
       the active window is, 'Primary' - only on the primary monitor -->
    <primaryMonitor>1</primaryMonitor>
    <!-- The monitor where Openbox should place popup dialogs such as the
       focus cycling popup, or the desktop switch popup.  It can be an index
       from 1, specifying a particular monitor.  Or it can be one of the
       following: 'Mouse' - where the mouse is, or
                  'Active' - where the active window is -->
  </placement>
  <theme>
    <name>Shiki-Nouveau-Wisedust</name>
    <titleLayout>LM</titleLayout>
    <!--
      available characters are NDSLIMC, each can occur at most once.
      N: window icon
      L: window label (AKA title).
      I: iconify
      M: maximize
      C: close
      S: shade (roll up/down)
      D: omnipresent (on all desktops).
  -->
    <keepBorder>yes</keepBorder>
    <animateIconify>yes</animateIconify>
    <font place="ActiveWindow">
      <name>sans</name>
      <size>8</size>
      <!-- font size in points -->
      <weight>bold</weight>
      <!-- 'bold' or 'normal' -->
      <slant>normal</slant>
      <!-- 'italic' or 'normal' -->
    </font>
    <font place="InactiveWindow">
      <name>sans</name>
      <size>8</size>
      <!-- font size in points -->
      <weight>bold</weight>
      <!-- 'bold' or 'normal' -->
      <slant>normal</slant>
      <!-- 'italic' or 'normal' -->
    </font>
    <font place="MenuHeader">
      <name>sans</name>
      <size>9</size>
      <!-- font size in points -->
      <weight>normal</weight>
      <!-- 'bold' or 'normal' -->
      <slant>normal</slant>
      <!-- 'italic' or 'normal' -->
    </font>
    <font place="MenuItem">
      <name>sans</name>
      <size>9</size>
      <!-- font size in points -->
      <weight>normal</weight>
      <!-- 'bold' or 'normal' -->
      <slant>normal</slant>
      <!-- 'italic' or 'normal' -->
    </font>
    <font place="ActiveOnScreenDisplay">
      <name>sans</name>
      <size>9</size>
      <!-- font size in points -->
      <weight>bold</weight>
      <!-- 'bold' or 'normal' -->
      <slant>normal</slant>
      <!-- 'italic' or 'normal' -->
    </font>
    <font place="InactiveOnScreenDisplay">
      <name>sans</name>
      <size>9</size>
      <!-- font size in points -->
      <weight>bold</weight>
      <!-- 'bold' or 'normal' -->
      <slant>normal</slant>
      <!-- 'italic' or 'normal' -->
    </font>
  </theme>
  <desktops>
    <!-- this stuff is only used at startup, pagers allow you to change them
       during a session

       these are default values to use when other ones are not already set
       by other applications, or saved in your session

       use obconf if you want to change these without having to log out
       and back in -->
    <number>4</number>
    <firstdesk>1</firstdesk>
    <names>
      <!-- set names up here if you want to, like this:
    <name>desktop 1</name>
    <name>desktop 2</name>
    -->
    </names>
    <popupTime>875</popupTime>
    <!-- The number of milliseconds to show the popup for when switching
       desktops.  Set this to 0 to disable the popup. -->
  </desktops>
  <resize>
    <drawContents>yes</drawContents>
    <popupShow>Nonpixel</popupShow>
    <!-- 'Always', 'Never', or 'Nonpixel' (xterms and such) -->
    <popupPosition>Center</popupPosition>
    <!-- 'Center', 'Top', or 'Fixed' -->
    <popupFixedPosition>
      <!-- these are used if popupPosition is set to 'Fixed' -->
      <x>10</x>
      <!-- positive number for distance from left edge, negative number for
         distance from right edge, or 'Center' -->
      <y>10</y>
      <!-- positive number for distance from top edge, negative number for
         distance from bottom edge, or 'Center' -->
    </popupFixedPosition>
  </resize>
  <!-- You can reserve a portion of your screen where windows will not cover when
     they are maximized, or when they are initially placed.
     Many programs reserve space automatically, but you can use this in other
     cases. -->
  <margins>
    <top>0</top>
    <bottom>0</bottom>
    <left>0</left>
    <right>0</right>
  </margins>
  <dock>
    <position>TopLeft</position>
    <!-- (Top|Bottom)(Left|Right|)|Top|Bottom|Left|Right|Floating -->
    <floatingX>0</floatingX>
    <floatingY>0</floatingY>
    <noStrut>no</noStrut>
    <stacking>Above</stacking>
    <!-- 'Above', 'Normal', or 'Below' -->
    <direction>Vertical</direction>
    <!-- 'Vertical' or 'Horizontal' -->
    <autoHide>no</autoHide>
    <hideDelay>300</hideDelay>
    <!-- in milliseconds (1000 = 1 second) -->
    <showDelay>300</showDelay>
    <!-- in milliseconds (1000 = 1 second) -->
    <moveButton>Middle</moveButton>
    <!-- 'Left', 'Middle', 'Right' -->
  </dock>
  <keyboard>
    <chainQuitKey>C-g</chainQuitKey>
    <!-- Keybindings for desktop switching -->
    <keybind key="C-A-Left">
      <action name="GoToDesktop">
        <to>left</to>
        <wrap>no</wrap>
      </action>
    </keybind>
    <keybind key="C-A-Right">
      <action name="GoToDesktop">
        <to>right</to>
        <wrap>no</wrap>
      </action>
    </keybind>
    <keybind key="C-A-Up">
      <action name="GoToDesktop">
        <to>up</to>
        <wrap>no</wrap>
      </action>
    </keybind>
    <keybind key="C-A-Down">
      <action name="GoToDesktop">
        <to>down</to>
        <wrap>no</wrap>
      </action>
    </keybind>
    <keybind key="S-A-Left">
      <action name="SendToDesktop">
        <to>left</to>
        <wrap>no</wrap>
      </action>
    </keybind>
    <keybind key="S-A-Right">
      <action name="SendToDesktop">
        <to>right</to>
        <wrap>no</wrap>
      </action>
    </keybind>
    <keybind key="S-A-Up">
      <action name="SendToDesktop">
        <to>up</to>
        <wrap>no</wrap>
      </action>
    </keybind>
    <keybind key="S-A-Down">
      <action name="SendToDesktop">
        <to>down</to>
        <wrap>no</wrap>
      </action>
    </keybind>
    <keybind key="C-KP_1">
      <action name="GoToDesktop">
        <to>1</to>
      </action>
    </keybind>
    <keybind key="C-KP_0">
      <action name="GoToDesktop">
        <to>2</to>
      </action>
    </keybind>
    <keybind key="C-KP_2">
      <action name="GoToDesktop">
        <to>3</to>
      </action>
    </keybind>
    <keybind key="C-KP_4">
      <action name="GoToDesktop">
        <to>4</to>
      </action>
    </keybind>
    <keybind key="W-d">
      <action name="ToggleShowDesktop"/>
    </keybind>
    <!-- Keybindings for windows -->
    <keybind key="W-c">
      <action name="Close"/>
    </keybind>
    <keybind key="A-Escape">
      <action name="Lower"/>
      <action name="FocusToBottom"/>
      <action name="Unfocus"/>
    </keybind>
    <keybind key="A-space">
      <action name="ShowMenu">
        <menu>client-menu</menu>
      </action>
    </keybind>
    <!-- Keybindings for window switching -->
    <keybind key="A-Tab">
      <action name="NextWindow">
        <finalactions>
          <action name="Focus"/>
          <action name="Raise"/>
          <action name="Unshade"/>
        </finalactions>
      </action>
    </keybind>
    <keybind key="A-S-Tab">
      <action name="PreviousWindow">
        <finalactions>
          <action name="Focus"/>
          <action name="Raise"/>
          <action name="Unshade"/>
        </finalactions>
      </action>
    </keybind>
    <keybind key="C-A-Tab">
      <action name="NextWindow">
        <panels>yes</panels>
        <desktop>yes</desktop>
        <finalactions>
          <action name="Focus"/>
          <action name="Raise"/>
          <action name="Unshade"/>
        </finalactions>
      </action>
    </keybind>
    <!-- Keybindings for window switching with the arrow keys -->
    <keybind key="W-S-Right">
      <action name="DirectionalCycleWindows">
        <direction>right</direction>
      </action>
    </keybind>
    <keybind key="W-S-Left">
      <action name="DirectionalCycleWindows">
        <direction>left</direction>
      </action>
    </keybind>
    <keybind key="W-S-Up">
      <action name="DirectionalCycleWindows">
        <direction>up</direction>
      </action>
    </keybind>
    <keybind key="W-S-Down">
      <action name="DirectionalCycleWindows">
        <direction>down</direction>
      </action>
    </keybind>
    <!-- Keybindings for running applications -->
    <keybind key="W-s">
      <action name="Execute">
        <startupnotify>
          <enabled>true</enabled>
          <name>synapse</name>
        </startupnotify>
        <command>synapse</command>
      </action>
    </keybind>
    <keybind key="W-t">
      <action name="Execute">
        <startupnotify>
          <enabled>true</enabled>
          <name>lxterminal</name>
        </startupnotify>
        <command>lxterminal</command>
      </action>
    </keybind>
    <keybind key="W-e">
      <action name="Execute">
        <startupnotify>
          <enabled>true</enabled>
          <name>thunar</name>
        </startupnotify>
        <command>thunar</command>
      </action>
    </keybind>
    <keybind key="W-p">
      <action name="Execute">
        <startupnotify>
          <enabled>true</enabled>
          <name>octopi</name>
        </startupnotify>
        <command>octopi</command>
      </action>
    </keybind>
    <keybind key="W-u">
      <action name="Execute">
        <startupnotify>
          <enabled>true</enabled>
          <name>octopi</name>
        </startupnotify>
        <command>octopi</command>
      </action>
    </keybind>
    <keybind key="W-m">
      <action name="Execute">
        <startupnotify>
          <enabled>true</enabled>
          <name>Mail</name>
        </startupnotify>
        <command>thunderbird</command>
      </action>
    </keybind>
    <keybind key="W-f">
      <action name="Execute">
        <startupnotify>
          <enabled>true</enabled>
          <name>Firefox</name>
        </startupnotify>
        <command>firefox</command>
      </action>
    </keybind>
    <keybind key="W-b">
      <action name="Execute">
        <startupnotify>
          <enabled>true</enabled>
          <name>Browser</name>
        </startupnotify>
        <command>/opt/slimboat/slimboat.sh %u</command>
      </action>
    </keybind>
    <keybind key="W-A-b">
      <action name="Execute">
        <startupnotify>
          <enabled>true</enabled>
          <name>Anonym Browsen</name>
        </startupnotify>
        <command>torify luakit</command>
      </action>
    </keybind>
    <keybind key="W-o">
      <action name="Execute">
        <startupnotify>
          <enabled>true</enabled>
          <name>Office</name>
        </startupnotify>
        <command>libreoffice</command>
      </action>
    </keybind>
    <keybind key="W-w">
      <action name="Execute">
        <startupnotify>
          <enabled>true</enabled>
          <name>Office Textbearbeitung</name>
        </startupnotify>
        <command>libreoffice --writer</command>
      </action>
    </keybind>
    <keybind key="W-A-e">
      <action name="Execute">
        <startupnotify>
          <enabled>true</enabled>
          <name>Office Tabellenkalkulation</name>
        </startupnotify>
        <command>libreoffice --calc</command>
      </action>
    </keybind>
    <keybind key="W-A-i">
      <action name="Execute">
        <startupnotify>
          <enabled>true</enabled>
          <name>Office Präsentationsprogramm</name>
        </startupnotify>
        <command>libreoffice --impress</command>
      </action>
    </keybind>
    <keybind key="W-i">
      <action name="Execute">
        <startupnotify>
          <enabled>true</enabled>
          <name>Bildbearbeitung</name>
        </startupnotify>
        <command>gimp</command>
      </action>
    </keybind>
    <keybind key="W-g">
      <action name="Execute">
        <startupnotify>
          <enabled>true</enabled>
          <name>Editor</name>
        </startupnotify>
        <command>geany</command>
      </action>
    </keybind>
    <keybind key="W-A-g">
      <action name="Execute">
        <startupnotify>
          <enabled>true</enabled>
          <name>Editor</name>
        </startupnotify>
        <command>gksudo geany</command>
      </action>
    </keybind>
    <keybind key="W-y">
      <action name="Execute">
        <startupnotify>
          <enabled>true</enabled>
          <name>Menü</name>
        </startupnotify>
        <command>xfce4-appfinder</command>
      </action>
    </keybind>
    <keybind key="W-x">
      <action name=<?xml version="1.0" encoding="UTF-8"?>
<!-- Do not edit this file, it will be overwritten on install.
        Copy the file to $HOME/.config/openbox/ instead. -->
<openbox_config xmlns="http://openbox.org/3.4/rc" xmlns:xi="http://www.w3.org/2001/XInclude">
  <resistance>
    <strength>10</strength>
    <screen_edge_strength>20</screen_edge_strength>
  </resistance>
  <focus>
    <focusNew>yes</focusNew>
    <!-- always try to focus new windows when they appear. other rules do
       apply -->
    <followMouse>no</followMouse>
    <!-- move focus to a window when you move the mouse into it -->
    <focusLast>yes</focusLast>
    <!-- focus the last used window when changing desktops, instead of the one
       under the mouse pointer. when followMouse is enabled -->
    <underMouse>no</underMouse>
    <!-- move focus under the mouse, even when the mouse is not moving -->
    <focusDelay>200</focusDelay>
    <!-- when followMouse is enabled, the mouse must be inside the window for
       this many milliseconds (1000 = 1 sec) before moving focus to it -->
    <raiseOnFocus>no</raiseOnFocus>
    <!-- when followMouse is enabled, and a window is given focus by moving the
       mouse into it, also raise the window -->
  </focus>
  <placement>
    <policy>Smart</policy>
    <!-- 'Smart' or 'UnderMouse' -->
    <center>yes</center>
    <!-- whether to place windows in the center of the free area found or
       the top left corner -->
    <monitor>Primary</monitor>
    <!-- with Smart placement on a multi-monitor system, try to place new windows
       on: 'Any' - any monitor, 'Mouse' - where the mouse is, 'Active' - where
       the active window is, 'Primary' - only on the primary monitor -->
    <primaryMonitor>1</primaryMonitor>
    <!-- The monitor where Openbox should place popup dialogs such as the
       focus cycling popup, or the desktop switch popup.  It can be an index
       from 1, specifying a particular monitor.  Or it can be one of the
       following: 'Mouse' - where the mouse is, or
                  'Active' - where the active window is -->
  </placement>
  <theme>
    <name>Shiki-Nouveau-Wisedust</name>
    <titleLayout>LM</titleLayout>
    <!--
      available characters are NDSLIMC, each can occur at most once.
      N: window icon
      L: window label (AKA title).
      I: iconify
      M: maximize
      C: close
      S: shade (roll up/down)
      D: omnipresent (on all desktops).
  -->
    <keepBorder>yes</keepBorder>
    <animateIconify>yes</animateIconify>
    <font place="ActiveWindow">
      <name>sans</name>
      <size>8</size>
      <!-- font size in points -->
      <weight>bold</weight>
      <!-- 'bold' or 'normal' -->
      <slant>normal</slant>
      <!-- 'italic' or 'normal' -->
    </font>
    <font place="InactiveWindow">
      <name>sans</name>
      <size>8</size>
      <!-- font size in points -->
      <weight>bold</weight>
      <!-- 'bold' or 'normal' -->
      <slant>normal</slant>
      <!-- 'italic' or 'normal' -->
    </font>
    <font place="MenuHeader">
      <name>sans</name>
      <size>9</size>
      <!-- font size in points -->
      <weight>normal</weight>
      <!-- 'bold' or 'normal' -->
      <slant>normal</slant>
      <!-- 'italic' or 'normal' -->
    </font>
    <font place="MenuItem">
      <name>sans</name>
      <size>9</size>
      <!-- font size in points -->
      <weight>normal</weight>
      <!-- 'bold' or 'normal' -->
      <slant>normal</slant>
      <!-- 'italic' or 'normal' -->
    </font>
    <font place="ActiveOnScreenDisplay">
      <name>sans</name>
      <size>9</size>
      <!-- font size in points -->
      <weight>bold</weight>
      <!-- 'bold' or 'normal' -->
      <slant>normal</slant>
      <!-- 'italic' or 'normal' -->
    </font>
    <font place="InactiveOnScreenDisplay">
      <name>sans</name>
      <size>9</size>
      <!-- font size in points -->
      <weight>bold</weight>
      <!-- 'bold' or 'normal' -->
      <slant>normal</slant>
      <!-- 'italic' or 'normal' -->
    </font>
  </theme>
  <desktops>
    <!-- this stuff is only used at startup, pagers allow you to change them
       during a session

       these are default values to use when other ones are not already set
       by other applications, or saved in your session

       use obconf if you want to change these without having to log out
       and back in -->
    <number>4</number>
    <firstdesk>1</firstdesk>
    <names>
      <!-- set names up here if you want to, like this:
    <name>desktop 1</name>
    <name>desktop 2</name>
    -->
    </names>
    <popupTime>875</popupTime>
    <!-- The number of milliseconds to show the popup for when switching
       desktops.  Set this to 0 to disable the popup. -->
  </desktops>
  <resize>
    <drawContents>yes</drawContents>
    <popupShow>Nonpixel</popupShow>
    <!-- 'Always', 'Never', or 'Nonpixel' (xterms and such) -->
    <popupPosition>Center</popupPosition>
    <!-- 'Center', 'Top', or 'Fixed' -->
    <popupFixedPosition>
      <!-- these are used if popupPosition is set to 'Fixed' -->
      <x>10</x>
      <!-- positive number for distance from left edge, negative number for
         distance from right edge, or 'Center' -->
      <y>10</y>
      <!-- positive number for distance from top edge, negative number for
         distance from bottom edge, or 'Center' -->
    </popupFixedPosition>
  </resize>
  <!-- You can reserve a portion of your screen where windows will not cover when
     they are maximized, or when they are initially placed.
     Many programs reserve space automatically, but you can use this in other
     cases. -->
  <margins>
    <top>0</top>
    <bottom>0</bottom>
    <left>0</left>
    <right>0</right>
  </margins>
  <dock>
    <position>TopLeft</position>
    <!-- (Top|Bottom)(Left|Right|)|Top|Bottom|Left|Right|Floating -->
    <floatingX>0</floatingX>
    <floatingY>0</floatingY>
    <noStrut>no</noStrut>
    <stacking>Above</stacking>
    <!-- 'Above', 'Normal', or 'Below' -->
    <direction>Vertical</direction>
    <!-- 'Vertical' or 'Horizontal' -->
    <autoHide>no</autoHide>
    <hideDelay>300</hideDelay>
    <!-- in milliseconds (1000 = 1 second) -->
    <showDelay>300</showDelay>
    <!-- in milliseconds (1000 = 1 second) -->
    <moveButton>Middle</moveButton>
    <!-- 'Left', 'Middle', 'Right' -->
  </dock>
  <keyboard>
    <chainQuitKey>C-g</chainQuitKey>
    <!-- Keybindings for desktop switching -->
    <keybind key="C-A-Left">
      <action name="GoToDesktop">
        <to>left</to>
        <wrap>no</wrap>
      </action>
    </keybind>
    <keybind key="C-A-Right">
      <action name="GoToDesktop">
        <to>right</to>
        <wrap>no</wrap>
      </action>
    </keybind>
    <keybind key="C-A-Up">
      <action name="GoToDesktop">
        <to>up</to>
        <wrap>no</wrap>
      </action>
    </keybind>
    <keybind key="C-A-Down">
      <action name="GoToDesktop">
        <to>down</to>
        <wrap>no</wrap>
      </action>
    </keybind>
    <keybind key="S-A-Left">
      <action name="SendToDesktop">
        <to>left</to>
        <wrap>no</wrap>
      </action>
    </keybind>
    <keybind key="S-A-Right">
      <action name="SendToDesktop">
        <to>right</to>
        <wrap>no</wrap>
      </action>
    </keybind>
    <keybind key="S-A-Up">
      <action name="SendToDesktop">
        <to>up</to>
        <wrap>no</wrap>
      </action>
    </keybind>
    <keybind key="S-A-Down">
      <action name="SendToDesktop">
        <to>down</to>
        <wrap>no</wrap>
      </action>
    </keybind>
    <keybind key="C-KP_1">
      <action name="GoToDesktop">
        <to>1</to>
      </action>
    </keybind>
    <keybind key="C-KP_0">
      <action name="GoToDesktop">
        <to>2</to>
      </action>
    </keybind>
    <keybind key="C-KP_2">
      <action name="GoToDesktop">
        <to>3</to>
      </action>
    </keybind>
    <keybind key="C-KP_4">
      <action name="GoToDesktop">
        <to>4</to>
      </action>
    </keybind>
    <keybind key="W-d">
      <action name="ToggleShowDesktop"/>
    </keybind>
    <!-- Keybindings for windows -->
    <keybind key="W-c">
      <action name="Close"/>
    </keybind>
    <keybind key="A-Escape">
      <action name="Lower"/>
      <action name="FocusToBottom"/>
      <action name="Unfocus"/>
    </keybind>
    <keybind key="A-space">
      <action name="ShowMenu">
        <menu>client-menu</menu>
      </action>
    </keybind>
    <!-- Keybindings for window switching -->
    <keybind key="A-Tab">
      <action name="NextWindow">
        <finalactions>
          <action name="Focus"/>
          <action name="Raise"/>
          <action name="Unshade"/>
        </finalactions>
      </action>
    </keybind>
    <keybind key="A-S-Tab">
      <action name="PreviousWindow">
        <finalactions>
          <action name="Focus"/>
          <action name="Raise"/>
          <action name="Unshade"/>
        </finalactions>
      </action>
    </keybind>
    <keybind key="C-A-Tab">
      <action name="NextWindow">
        <panels>yes</panels>
        <desktop>yes</desktop>
        <finalactions>
          <action name="Focus"/>
          <action name="Raise"/>
          <action name="Unshade"/>
        </finalactions>
      </action>
    </keybind>
    <!-- Keybindings for window switching with the arrow keys -->
    <keybind key="W-S-Right">
      <action name="DirectionalCycleWindows">
        <direction>right</direction>
      </action>
    </keybind>
    <keybind key="W-S-Left">
      <action name="DirectionalCycleWindows">
        <direction>left</direction>
      </action>
    </keybind>
    <keybind key="W-S-Up">
      <action name="DirectionalCycleWindows">
        <direction>up</direction>
      </action>
    </keybind>
    <keybind key="W-S-Down">
      <action name="DirectionalCycleWindows">
        <direction>down</direction>
      </action>
    </keybind>
    <!-- Keybindings for running applications -->
    <keybind key="W-s">
      <action name="Execute">
        <startupnotify>
          <enabled>true</enabled>
          <name>synapse</name>
        </startupnotify>
        <command>synapse</command>
      </action>
    </keybind>
    <keybind key="W-t">
      <action name="Execute">
        <startupnotify>
          <enabled>true</enabled>
          <name>lxterminal</name>
        </startupnotify>
        <command>lxterminal</command>
      </action>
    </keybind>
    <keybind key="W-e">
      <action name="Execute">
        <startupnotify>
          <enabled>true</enabled>
          <name>thunar</name>
        </startupnotify>
        <command>thunar</command>
      </action>
    </keybind>
    <keybind key="W-p">
      <action name="Execute">
        <startupnotify>
          <enabled>true</enabled>
          <name>octopi</name>
        </startupnotify>
        <command>octopi</command>
      </action>
    </keybind>
    <keybind key="W-u">
      <action name="Execute">
        <startupnotify>
          <enabled>true</enabled>
          <name>octopi</name>
        </startupnotify>
        <command>octopi</command>
      </action>
    </keybind>
    <keybind key="W-m">
      <action name="Execute">
        <startupnotify>
          <enabled>true</enabled>
          <name>Mail</name>
        </startupnotify>
        <command>thunderbird</command>
      </action>
    </keybind>
    <keybind key="W-f">
      <action name="Execute">
        <startupnotify>
          <enabled>true</enabled>
          <name>Firefox</name>
        </startupnotify>
        <command>firefox</command>
      </action>
    </keybind>
    <keybind key="W-b">
      <action name="Execute">
        <startupnotify>
          <enabled>true</enabled>
          <name>Browser</name>
        </startupnotify>
        <command>/opt/slimboat/slimboat.sh %u</command>
      </action>
    </keybind>
    <keybind key="W-A-b">
      <action name="Execute">
        <startupnotify>
          <enabled>true</enabled>
          <name>Anonym Browsen</name>
        </startupnotify>
        <command>torify luakit</command>
      </action>
    </keybind>
    <keybind key="W-o">
      <action name="Execute">
        <startupnotify>
          <enabled>true</enabled>
          <name>Office</name>
        </startupnotify>
        <command>libreoffice</command>
      </action>
    </keybind>
    <keybind key="W-w">
      <action name="Execute">
        <startupnotify>
          <enabled>true</enabled>
          <name>Office Textbearbeitung</name>
        </startupnotify>
        <command>libreoffice --writer</command>
      </action>
    </keybind>
    <keybind key="W-A-e">
      <action name="Execute">
        <startupnotify>
          <enabled>true</enabled>
          <name>Office Tabellenkalkulation</name>
        </startupnotify>
        <command>libreoffice --calc</command>
      </action>
    </keybind>
    <keybind key="W-A-i">
      <action name="Execute">
        <startupnotify>
          <enabled>true</enabled>
          <name>Office Präsentationsprogramm</name>
        </startupnotify>
        <command>libreoffice --impress</command>
      </action>
    </keybind>
    <keybind key="W-i">
      <action name="Execute">
        <startupnotify>
          <enabled>true</enabled>
          <name>Bildbearbeitung</name>
        </startupnotify>
        <command>gimp</command>
      </action>
    </keybind>
    <keybind key="W-g">
      <action name="Execute">
        <startupnotify>
          <enabled>true</enabled>
          <name>Editor</name>
        </startupnotify>
        <command>geany</command>
      </action>
    </keybind>
    <keybind key="W-A-g">
      <action name="Execute">
        <startupnotify>
          <enabled>true</enabled>
          <name>Editor</name>
        </startupnotify>
        <command>gksudo geany</command>
      </action>
    </keybind>
    <keybind key="W-y">
      <action name="Execute">
        <startupnotify>
          <enabled>true</enabled>
          <name>Menü</name>
        </startupnotify>
        <command>xfce4-appfinder</command>
      </action>
    </keybind>
    <keybind key="W-x">
      <action name="Execute">
        <startupnotify>
          <enabled>true</enabled>
          <name>oblogout</name>
        </startupnotify>
        <command>oblogout</command>
      </action>
    </keybind>
    <keybind key="Print">
      <action name="Execute">
        <startupnotify>
          <enabled>true</enabled>
          <name>gnome-screenshot</name>
        </startupnotify>
        <command>gnome-screenshot</command>
      </action>
    </keybind>
    <keybind key="XF86MonBrightnessUp">
      <action name="Execute">
        <command>xbacklight +5</command>
      </action>
    </keybind>
    <keybind key="XF86MonBrightnessDown">
      <action name="Execute">
        <command>xbacklight -5</command>
      </action>
    </keybind>
    <!-- Where installing pulse-audio instead, change 'amixer set' to 'amixer -D pulse set' -->
    <keybind key="XF86AudioRaiseVolume">
      <action name="Execute">
        <command>amixer set Master 5%+</command>
      </action>
    </keybind>
    <!-- Where installing pulse-audio instead, change 'amixer set' to 'amixer -D pulse set' -->
    <keybind key="XF86AudioLowerVolume">
      <action name="Execute">
        <command>amixer set Master 5%-</command>
      </action>
    </keybind>
    <!-- Where installing pulse-audio instead, nothing needs to be changed -->
    <keybind key="XF86AudioMute">
      <action name="Execute">
        <command>amixer set Master toggle</command>
      </action>
    </keybind>
  </keyboard>
  <mouse>
    <dragThreshold>1</dragThreshold>
    <!-- number of pixels the mouse must move before a drag begins -->
    <doubleClickTime>200</doubleClickTime>
    <!-- in milliseconds (1000 = 1 second) -->
    <screenEdgeWarpTime>400</screenEdgeWarpTime>
    <!-- Time before changing desktops when the pointer touches the edge of the
       screen while moving a window, in milliseconds (1000 = 1 second).
       Set this to 0 to disable warping -->
    <screenEdgeWarpMouse>false</screenEdgeWarpMouse>
    <!-- Set this to TRUE to move the mouse pointer across the desktop when
       switching due to hitting the edge of the screen -->
    <context name="Frame">
      <mousebind button="A-Left" action="Press">
        <action name="Focus"/>
        <action name="Raise"/>
      </mousebind>
      <mousebind button="A-Left" action="Click">
        <action name="Unshade"/>
      </mousebind>
      <mousebind button="S-Left" action="Drag">
        <action name="Move"/>
      </mousebind>
      <mousebind button="A-Right" action="Press">
        <action name="Focus"/>
        <action name="Raise"/>
        <action name="Unshade"/>
      </mousebind>
      <mousebind button="A-Right" action="Drag">
        <action name="Resize"/>
      </mousebind>
      <mousebind button="A-Middle" action="Press">
        <action name="Lower"/>
        <action name="FocusToBottom"/>
        <action name="Unfocus"/>
      </mousebind>
      <mousebind button="A-Up" action="Click">
        <action name="GoToDesktop">
          <to>previous</to>
        </action>
      </mousebind>
      <mousebind button="A-Down" action="Click">
        <action name="GoToDesktop">
          <to>next</to>
        </action>
      </mousebind>
      <mousebind button="C-A-Up" action="Click">
        <action name="GoToDesktop">
          <to>previous</to>
        </action>
      </mousebind>
      <mousebind button="C-A-Down" action="Click">
        <action name="GoToDesktop">
          <to>next</to>
        </action>
      </mousebind>
      <mousebind button="A-S-Up" action="Click">
        <action name="SendToDesktop">
          <to>previous</to>
        </action>
      </mousebind>
      <mousebind button="A-S-Down" action="Click">
        <action name="SendToDesktop">
          <to>next</to>
        </action>
      </mousebind>
    </context>
    <context name="Titlebar">
      <mousebind button="Left" action="Drag">
        <action name="Move"/>
      </mousebind>
      <mousebind button="Left" action="DoubleClick">
        <action name="ToggleMaximize"/>
      </mousebind>
      <mousebind button="Up" action="Click">
      &nb
« Letzte Änderung: 02. November 2013, 08:01:24 von Linu74 »
A mind is like a parachute, it doesn't work unless it's open
Frank Zappa

Offline Ocsej

  • Held Mitglied
  • *****
  • Beiträge: 580
  • Dankeschön: 2 mal
  • Ocsej
  • Desktop: Openbox /-Laptop Openbox
  • Grafikkarte: Desktoprechner nVidia Geforce 8500 GT / Laptop ATI Mobility RADEON HD 3470
  • Grafikkartentreiber: Desktop Rechner nVidia-free / Laptop ATI-free
  • Kernel: 4.1.6-1-ARCH /-64bit
  • Prozessor: Desktop Rechner (HP) AMD 5600 / Laptop Acer Aspire 5530G QL60 1,9GHz
  • Skill: Durchschnitt
  • Zweig: ARCH /-Stable
Re: Firefox in Openbox startet nicht und andere Fragen
« Antwort #19 am: 01. November 2013, 22:33:07 »
HI sam,

ich habe mir gerade den "cclive" installiert und ausprobiert. Der ist ja super, und der ist ja echt so simpel wie der "wget" so wie ich es mag.

Danke für den Tipp mit dem "cclive" und Deine Anleitung!

Eine frage habe ich noch, kann ich dem "cclive" auch einen festen Speicher Ort zuweisen?
Bei "wget" weiß ich dass das nicht geht.

Ocsej
Deutscher Manjaro IRC Channel auf Freenode #manjaro-de

ARCH /-64bit installiert.

Ocsej