Autor Thema: Externe Festplatten werden sehr langsam erkannt  (Gelesen 835 mal)

0 Mitglieder und 1 Gast betrachten dieses Thema.

Offline SpiritOfTux

  • Held Mitglied
  • *****
  • Beiträge: 1430
  • Dankeschön: 221 mal
  • Karma: +0/-0
    • https://twitter.com/SpiritOfTux
  • Desktop: KDE Plasma
  • Grafikkarte: NVIDIA [GeForce RTX 2070] [GeForce GTX 1060] [GeForce GTX 560 Ti] [GeForce GT 635M]
  • Grafikkartentreiber: On: NB Nvidia, HTPC Nvidia, PowerWorkStation Nvidia
  • Kernel: LTS, 5.4.y; 4.19.y; 4.14.y,
  • Prozessor: Notebook: Tuxedo Computers XA1510 AMD Ryzen 9 3900X; WorkStation Intel Xeon
  • Skill: Fortgeschritten
  • Zweig: Stable Version: on PowerWorkStation, NB, HTPC, Desktop:s: Testing/Unstable only VM
Re: Externe Festplatten werden sehr langsam erkannt
« Antwort #15 am: 20. August 2020, 16:41:20 »
Zum Logfile:
Zitat
[44760.138820] WARNING: CPU: 0 PID: 47246 at drivers/gpu/drm/nouveau/nvif/vmm.c:68 nvif_vmm_put.cold+0xc/0x13 [nouveau]
[45152.806102] WARNING: CPU: 1 PID: 7138 at drivers/gpu/drm/nouveau/nvif/vmm.c:68 nvif_vmm_put.cold+0xc/0x13 [nouveau]
...mehrfach
diese Meldungen beziehen sich auf:
Zitat
Graphics:  Device-1: NVIDIA GT218 [GeForce 210] driver: nouveau v: kernel bus ID: 01:00.0 chip ID: 10de:0a65

Der Treiber für diese Karte wurde wegen Anpassungsschwerigkeiten, eingestellt.
Im Internationalen Forum (Archiv) sollte sich hierzu noch einiges an Doku finden lassen.

Zitat
LINUX X64 (AMD64/EM64T) DISPLAY DRIVER
Version:   340.108
Release Date:   2019.12.23
Operating System:   Linux 64-bit
Language:   English (US)
File Size:   66.92 MB
https://www.nvidia.com/download/driverResults.aspx/156163/en-us

Gut gemeint den Output nach Pastebin hochzuladen, aber und nun komms
------------[ cut here ]------------ (mehrfach)
enthalten Information die zum auswerten nötig sind

Wir gehen wie folgt vor:

# Wir erstellen ein File Namens journalctl_boot0.txt

journalctl -b > journalctl_boot0.txt

# Wir fügen diesem File weiteren Output hinzu

lspci -nnn >> journalctl_boot0.txt

so bleiben auch alle Formatierungen erhalten und ist insgesamt
lesbarer.

Jetzt laden wir dieses File " journalctl_boot0.txt " nach Pastebin hoch.
Dann sehe ich es mir nochmals an.

Zu:
Zitat
sg_vpd -a /dev/sda     
bash: sg_vpd: Kommando nicht gefunden

Dieses Komanndo ist Bestandteil des TRIM Support's (Kernel; automatische Durchführung)
hier kommt dieser Punkt wieder zum tragen:

Zu: Samsung model: SSD 860 QVO 1TB
https://wiki.archlinux.org/index.php/Solid_state_drive#Firmware
siehe hier " Samsung "

Mein Vorschlag LTS-Kernel 5.4 zusätzlich installieren/starten,
dann wieder ein File Namens  " journalctl_boot54.txt " erstellen.
« Letzte Änderung: 20. August 2020, 16:45:24 von SpiritOfTux »
Vielen Dank, dass du diesen Artikel bei uns gelesen hast!  Wir würden uns sehr freuen, wenn du diesen ebenfalls im folgenden Abschnitt bewerten würdest.(Danke sagen) 
Nach hilfreichen Antworten suchen: Manjaro Forum | Manjaro Wiki | Arch Wiki | Arch WiKi on NB/PC : sudo pacman -S arch-wiki-man https://github.com/greg-js/arch-wiki-man#readme

Offline Lehmeier

  • Sr. Mitglied
  • ****
  • Beiträge: 252
  • Dankeschön: 2 mal
  • Karma: +0/-0
  • Desktop: KDE
  • Prozessor: 2.5 GHZ Dual Core
  • Skill: Anfänger
  • Zweig: Stable
Re: Externe Festplatten werden sehr langsam erkannt
« Antwort #16 am: 20. August 2020, 20:55:47 »

journalctl_boot0.txt
https://pastebin.com/v6v3MFA6


journalctl_boot54.txt
https://pastebin.com/4wW3qmxf

Was den NVIDIA-Treiber angeht den werde ich mir mal in Ruhe ansehen.
Scheint so als ob ich den offenen Treiber installiert habe und nicht den propitären. War wohl keine gute Idee.
Sollte ich zurück auf den propitären?

Offline SpiritOfTux

  • Held Mitglied
  • *****
  • Beiträge: 1430
  • Dankeschön: 221 mal
  • Karma: +0/-0
    • https://twitter.com/SpiritOfTux
  • Desktop: KDE Plasma
  • Grafikkarte: NVIDIA [GeForce RTX 2070] [GeForce GTX 1060] [GeForce GTX 560 Ti] [GeForce GT 635M]
  • Grafikkartentreiber: On: NB Nvidia, HTPC Nvidia, PowerWorkStation Nvidia
  • Kernel: LTS, 5.4.y; 4.19.y; 4.14.y,
  • Prozessor: Notebook: Tuxedo Computers XA1510 AMD Ryzen 9 3900X; WorkStation Intel Xeon
  • Skill: Fortgeschritten
  • Zweig: Stable Version: on PowerWorkStation, NB, HTPC, Desktop:s: Testing/Unstable only VM
Re: Externe Festplatten werden sehr langsam erkannt
« Antwort #17 am: 21. August 2020, 09:37:16 »
Kernel 4.19.n und 5.4.n
Zitat
Aug 20 18:19:52 Lin001 kernel: intel_rng: Firmware space is locked read-only. If you can't or
                               intel_rng: don't want to disable this in firmware setup, and if
                               intel_rng: you are certain that your system has a functional
                               intel_rng: RNG, try using the 'no_fwh_detect' option.

ToDo: (for /etc/default/grub)
Zitat
options intel-rng no_fwh_detect=1
Kernel 4.19.n und 5.4.n
sudo update-grub


Kernel 4.19.n und 5.4.n
Zitat
Aug 20 18:19:52 Lin001 kernel: ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000828-0x000000000000082D (\GLBC) (20180810/utaddress-204)
Aug 20 18:19:52 Lin001 kernel: ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x000000000000082A-0x000000000000082A (\SACT) (20180810/utaddress-204)
Aug 20 18:19:52 Lin001 kernel: ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000828-0x0000000000000828 (\SSTS) (20180810/utaddress-204)
Aug 20 20:44:27 Lin001 kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Aug 20 20:44:27 Lin001 kernel: lpc_ich: Resource conflict(s) found affecting gpio_ich

Info:
lpc_ich ist ein "Multifunktions-Gerätetreiber", der alles handhabt, was nicht auf PCI/USB läuft
- Tastatur,Touchpad,Hintergrundbeleuchtungs-Controller usw. Das Ausschalten,
um ein GPIO zum Laufen zu bringen, lohnt sich wahrscheinlich nicht.

Kernel 4.19.n und 5.4.n
ToDo: (for /etc/default/grub)
Zitat
acpi_enforce_resources=lax
sudo update-grub

vor den Änderungen ein Backup von  (/etc/default/grub) erstellen
« Letzte Änderung: 21. August 2020, 09:39:50 von SpiritOfTux »
Vielen Dank, dass du diesen Artikel bei uns gelesen hast!  Wir würden uns sehr freuen, wenn du diesen ebenfalls im folgenden Abschnitt bewerten würdest.(Danke sagen) 
Nach hilfreichen Antworten suchen: Manjaro Forum | Manjaro Wiki | Arch Wiki | Arch WiKi on NB/PC : sudo pacman -S arch-wiki-man https://github.com/greg-js/arch-wiki-man#readme

Offline Lehmeier

  • Sr. Mitglied
  • ****
  • Beiträge: 252
  • Dankeschön: 2 mal
  • Karma: +0/-0
  • Desktop: KDE
  • Prozessor: 2.5 GHZ Dual Core
  • Skill: Anfänger
  • Zweig: Stable
Re: Externe Festplatten werden sehr langsam erkannt
« Antwort #18 am: 21. August 2020, 12:09:30 »
Ok, erst einmal ein großes Dankeschön für eure bisherige Hilfe.

Ich Habe alles eingetragen und mal 2 Versuche mit meinen 4 externen Festplatten ( 3 x Elements, 1 x My Book )gemacht.

Einmal unter KDE mit Dolphin - dort benötigt das Auswerfen ca 2 - 3 Sekunden, also völlig in -Ordnung.
Unter XFCE habe ich es mit Thunar versucht und dort dauert es ca 26 - 50 Sekunden. Kann es sein das XFCE hier seine Finger im Spiel hat oder Thunar mit irgendwas nicht klar kommt?

Offline SpiritOfTux

  • Held Mitglied
  • *****
  • Beiträge: 1430
  • Dankeschön: 221 mal
  • Karma: +0/-0
    • https://twitter.com/SpiritOfTux
  • Desktop: KDE Plasma
  • Grafikkarte: NVIDIA [GeForce RTX 2070] [GeForce GTX 1060] [GeForce GTX 560 Ti] [GeForce GT 635M]
  • Grafikkartentreiber: On: NB Nvidia, HTPC Nvidia, PowerWorkStation Nvidia
  • Kernel: LTS, 5.4.y; 4.19.y; 4.14.y,
  • Prozessor: Notebook: Tuxedo Computers XA1510 AMD Ryzen 9 3900X; WorkStation Intel Xeon
  • Skill: Fortgeschritten
  • Zweig: Stable Version: on PowerWorkStation, NB, HTPC, Desktop:s: Testing/Unstable only VM
Re: Externe Festplatten werden sehr langsam erkannt
« Antwort #19 am: 21. August 2020, 12:45:03 »
Ok, erst einmal ein großes Dankeschön für eure bisherige Hilfe.

Ich Habe alles eingetragen und mal 2 Versuche mit meinen 4 externen Festplatten ( 3 x Elements, 1 x My Book )gemacht.

Einmal unter KDE mit Dolphin - dort benötigt das Auswerfen ca 2 - 3 Sekunden, also völlig in -Ordnung.
Unter XFCE habe ich es mit Thunar versucht und dort dauert es ca 26 - 50 Sekunden. Kann es sein das XFCE hier seine Finger im Spiel hat oder Thunar mit irgendwas nicht klar kommt?

Einfach zu erklären, KDE <== direkte Verbindung ==> zum Kernel.
Vielen Dank, dass du diesen Artikel bei uns gelesen hast!  Wir würden uns sehr freuen, wenn du diesen ebenfalls im folgenden Abschnitt bewerten würdest.(Danke sagen) 
Nach hilfreichen Antworten suchen: Manjaro Forum | Manjaro Wiki | Arch Wiki | Arch WiKi on NB/PC : sudo pacman -S arch-wiki-man https://github.com/greg-js/arch-wiki-man#readme

Offline Lehmeier

  • Sr. Mitglied
  • ****
  • Beiträge: 252
  • Dankeschön: 2 mal
  • Karma: +0/-0
  • Desktop: KDE
  • Prozessor: 2.5 GHZ Dual Core
  • Skill: Anfänger
  • Zweig: Stable
Re: Externe Festplatten werden sehr langsam erkannt
« Antwort #20 am: 21. August 2020, 14:37:55 »
Einfach zu erklären, KDE <== direkte Verbindung ==> zum Kernel.

Heißt das, das es XFCE nicht möglich ist auf den Kernel zuzugreifen und das dies auch nicht beabsichtigt ist?
Ist dies denn zu kompliziert und anfällig das es nicht gemacht wird ?

Offline SpiritOfTux

  • Held Mitglied
  • *****
  • Beiträge: 1430
  • Dankeschön: 221 mal
  • Karma: +0/-0
    • https://twitter.com/SpiritOfTux
  • Desktop: KDE Plasma
  • Grafikkarte: NVIDIA [GeForce RTX 2070] [GeForce GTX 1060] [GeForce GTX 560 Ti] [GeForce GT 635M]
  • Grafikkartentreiber: On: NB Nvidia, HTPC Nvidia, PowerWorkStation Nvidia
  • Kernel: LTS, 5.4.y; 4.19.y; 4.14.y,
  • Prozessor: Notebook: Tuxedo Computers XA1510 AMD Ryzen 9 3900X; WorkStation Intel Xeon
  • Skill: Fortgeschritten
  • Zweig: Stable Version: on PowerWorkStation, NB, HTPC, Desktop:s: Testing/Unstable only VM
Re: Externe Festplatten werden sehr langsam erkannt
« Antwort #21 am: 21. August 2020, 16:08:12 »
Heißt das, das es XFCE nicht möglich ist auf den Kernel zuzugreifen und das dies auch nicht beabsichtigt ist?
Ist dies denn zu kompliziert und anfällig das es nicht gemacht wird ?

XFCE startet hier für entsprechende Scripte, die Zeitdifferenz kann auch an der jeweiligen Auslastung
des Systems liegen.

Unabhängig hier von sollte die Xorg.log noch mal geprüft werden ob ähnliche Meldung (xorg-fonts-)
wie in diesem Artikel https://de.manjaro.org/index.php?topic=9702.msg60134#msg60134
vorhanden sind.

Vielen Dank, dass du diesen Artikel bei uns gelesen hast!  Wir würden uns sehr freuen, wenn du diesen ebenfalls im folgenden Abschnitt bewerten würdest.(Danke sagen) 
Nach hilfreichen Antworten suchen: Manjaro Forum | Manjaro Wiki | Arch Wiki | Arch WiKi on NB/PC : sudo pacman -S arch-wiki-man https://github.com/greg-js/arch-wiki-man#readme
Folgende Mitglieder bedankten sich: Lehmeier

Offline Lehmeier

  • Sr. Mitglied
  • ****
  • Beiträge: 252
  • Dankeschön: 2 mal
  • Karma: +0/-0
  • Desktop: KDE
  • Prozessor: 2.5 GHZ Dual Core
  • Skill: Anfänger
  • Zweig: Stable
Re: Externe Festplatten werden sehr langsam erkannt
« Antwort #22 am: 21. August 2020, 18:08:38 »
Die Datei /var/run/acpid.socket ist nicht vorhanden.

X-Org-Fonts 75 und Xorg-Fonts-100 sind installiert, die Datei /var/run/acpid.socket ist immer noch nicht vorhanden.

Xorg.0.log aus /var/log/ zeigt folgendes an:

[     9.631]
X.Org X Server 1.20.8
X Protocol Version 11, Revision 0
[     9.631] Build Operating System: Linux Manjaro Linux
[     9.631] Current Operating System: Linux Lin001 5.4.57-1-MANJARO #1 SMP PREEMPT Fri Aug 7 09:54:45 UTC 2020 x86_64
[     9.631] Kernel command line: BOOT_IMAGE=/vmlinuz-5.4-x86_64 root=UUID=af6048e9-f9f2-4f8d-b11d-722200a80f22 rw quiet nvm_load=YES apparmor=1 security=apparmor udev.log_priority=3 acpi_enforce_resources=lax options intel-rng no_fwh_detect=1
[     9.631] Build Date: 01 August 2020  07:25:56AM
[     9.631] 
[     9.631] Current version of pixman: 0.40.0
[     9.631] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[     9.631] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     9.631] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 21 18:02:46 2020
[     9.641] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     9.641] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     9.657] (==) ServerLayout "Layout0"
[     9.657] (**) |-->Screen "Screen0" (0)
[     9.657] (**) |   |-->Monitor "Monitor0"
[     9.657] (**) |   |-->Device "Device0"
[     9.658] (**) |-->Input Device "Keyboard0"
[     9.658] (**) |-->Input Device "Mouse0"
[     9.658] (==) Automatically adding devices
[     9.658] (==) Automatically enabling devices
[     9.658] (==) Automatically adding GPU devices
[     9.658] (==) Automatically binding GPU devices
[     9.658] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     9.676] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[     9.676] Entry deleted from font path.
[     9.677] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[     9.677] Entry deleted from font path.
[     9.692] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[     9.692] (==) ModulePath set to "/usr/lib/xorg/modules"
[     9.692] (**) Extension "COMPOSITE" is enabled
[     9.692] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[     9.692] (WW) Disabling Keyboard0
[     9.692] (WW) Disabling Mouse0
[     9.692] (II) Module ABI versions:
[     9.692] X.Org ANSI C Emulation: 0.4
[     9.692] X.Org Video Driver: 24.1
[     9.692] X.Org XInput driver : 24.1
[     9.692] X.Org Server Extension : 10.0
[     9.697] (++) using VT number 7

[     9.697] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     9.698] (II) xfree86: Adding drm device (/dev/dri/card0)
[     9.703] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[     9.703] (**) OutputClass "nvidia" setting /dev/dri/card0 as PrimaryGPU
[     9.706] (--) PCI:*(1@0:0:0) 10de:0a65:0000:0000 rev 162, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000dc80/128, BIOS @ 0x????????/131072
[     9.707] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     9.707] (II) LoadModule: "glx"
[     9.707] (II) Loading /usr/lib/nvidia/xorg/libglx.so
[    10.174] (II) Module glx: vendor="NVIDIA Corporation"
[    10.174] compiled for 4.0.2, module version = 1.0.0
[    10.174] Module class: X.Org Server Extension
[    10.175] (II) NVIDIA GLX Module  340.108  Wed Dec 11 14:26:50 PST 2019
[    10.178] (II) LoadModule: "nvidia"
[    10.185] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    10.204] (II) Module nvidia: vendor="NVIDIA Corporation"
[    10.204] compiled for 4.0.2, module version = 1.0.0
[    10.204] Module class: X.Org Video Driver
[    10.205] (II) NVIDIA dlloader X Driver  340.108  Wed Dec 11 14:06:00 PST 2019
[    10.205] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    10.208] (II) Loading sub module "fb"
[    10.208] (II) LoadModule: "fb"
[    10.208] (II) Loading /usr/lib/xorg/modules/libfb.so
[    10.210] (II) Module fb: vendor="X.Org Foundation"
[    10.210] compiled for 1.20.8, module version = 1.0.0
[    10.210] ABI class: X.Org ANSI C Emulation, version 0.4
[    10.210] (WW) Unresolved symbol: fbGetGCPrivateKey
[    10.210] (II) Loading sub module "wfb"
[    10.210] (II) LoadModule: "wfb"
[    10.210] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    10.213] (II) Module wfb: vendor="X.Org Foundation"
[    10.213] compiled for 1.20.8, module version = 1.0.0
[    10.213] ABI class: X.Org ANSI C Emulation, version 0.4
[    10.213] (II) Loading sub module "ramdac"
[    10.213] (II) LoadModule: "ramdac"
[    10.213] (II) Module "ramdac" already built-in
[    10.216] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[    10.217] (==) NVIDIA(0): RGB weight 888
[    10.217] (==) NVIDIA(0): Default visual is TrueColor
[    10.217] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    10.218] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[    10.218] (**) NVIDIA(0): Option "NoLogo" "1"
[    10.218] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[    10.218] (**) NVIDIA(0): Enabling 2D acceleration
[    10.884] (II) NVIDIA(0): Display (LG Electronics L226WTQ (DFP-0)) does not support
[    10.884] (II) NVIDIA(0):     NVIDIA 3D Vision stereo.
[    10.884] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[    10.886] (II) NVIDIA(0): NVIDIA GPU GeForce 210 (GT218) at PCI:1:0:0 (GPU-0)
[    10.886] (--) NVIDIA(0): Memory: 1048576 kBytes
[    10.886] (--) NVIDIA(0): VideoBIOS: 70.18.5f.00.00
[    10.886] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    10.889] (--) NVIDIA(0): Valid display device(s) on GeForce 210 at PCI:1:0:0
[    10.889] (--) NVIDIA(0):     CRT-0
[    10.889] (--) NVIDIA(0):     CRT-1
[    10.889] (--) NVIDIA(0):     LG Electronics L226WTQ (DFP-0) (boot, connected)
[    10.889] (--) NVIDIA(0):     DFP-1
[    10.889] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[    10.889] (--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
[    10.889] (--) NVIDIA(0): LG Electronics L226WTQ (DFP-0): Internal TMDS
[    10.889] (--) NVIDIA(GPU-0): LG Electronics L226WTQ (DFP-0): 330.0 MHz maximum pixel clock
[    10.889] (--) NVIDIA(0): DFP-1: Internal TMDS
[    10.889] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[    10.889] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    10.889] (**) NVIDIA(0):     device LG Electronics L226WTQ (DFP-0) (Using EDID
[    10.889] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[    10.891] (==) NVIDIA(0):
[    10.891] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    10.891] (==) NVIDIA(0):     will be used as the requested mode.
[    10.891] (==) NVIDIA(0):
[    10.892] (II) NVIDIA(0): Validated MetaModes:
[    10.892] (II) NVIDIA(0):     "DFP-0:nvidia-auto-select"
[    10.892] (II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
[    10.924] (--) NVIDIA(0): DPI set to (87, 83); computed from "UseEdidDpi" X config
[    10.924] (--) NVIDIA(0):     option
[    10.924] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[    10.927] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    10.927] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    10.927] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    10.927] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    10.927] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    10.927] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    10.927] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    10.927] (II) NVIDIA(0):     Config Options in the README.
[    10.929] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[    10.990] (==) NVIDIA(0): Disabling shared memory pixmaps
[    10.991] (==) NVIDIA(0): Backing store enabled
[    10.991] (==) NVIDIA(0): Silken mouse disabled
[    10.991] (**) NVIDIA(0): DPMS enabled
[    10.992] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[    10.992] (II) Loading sub module "dri2"
[    10.992] (II) LoadModule: "dri2"
[    10.992] (II) Module "dri2" already built-in
[    10.992] (II) NVIDIA(0): [DRI2] Setup complete
[    10.992] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    10.994] (II) Initializing extension Generic Event Extension
[    10.994] (II) Initializing extension SHAPE
[    10.994] (II) Initializing extension MIT-SHM
[    10.994] (II) Initializing extension XInputExtension
[    10.994] (II) Initializing extension XTEST
[    10.995] (II) Initializing extension BIG-REQUESTS
[    10.995] (II) Initializing extension SYNC
[    10.995] (II) Initializing extension XKEYBOARD
[    10.996] (II) Initializing extension XC-MISC
[    10.996] (II) Initializing extension SECURITY
[    10.996] (II) Initializing extension XFIXES
[    10.996] (II) Initializing extension RENDER
[    10.996] (II) Initializing extension RANDR
[    10.997] (II) Initializing extension COMPOSITE
[    10.997] (II) Initializing extension DAMAGE
[    10.997] (II) Initializing extension MIT-SCREEN-SAVER
[    10.997] (II) Initializing extension DOUBLE-BUFFER
[    10.997] (II) Initializing extension RECORD
[    10.997] (II) Initializing extension DPMS
[    10.998] (II) Initializing extension Present
[    10.998] (II) Initializing extension DRI3
[    10.998] (II) Initializing extension X-Resource
[    10.998] (II) Initializing extension XVideo
[    10.998] (II) Initializing extension XVideo-MotionCompensation
[    10.998] (II) Initializing extension XFree86-VidModeExtension
[    10.998] (II) Initializing extension XFree86-DGA
[    10.998] (II) Initializing extension XFree86-DRI
[    10.998] (II) Initializing extension DRI2
[    10.999] (II) Initializing extension GLX
[    10.999] (II) Initializing extension GLX
[    10.999] (II) Indirect GLX disabled.(II) Initializing extension NV-GLX
[    10.999] (II) Initializing extension NV-CONTROL
[    10.999] (II) Initializing extension XINERAMA
[    11.228] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    11.228] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    11.228] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    11.228] (**) Power Button: Applying InputClass "system-keyboard"
[    11.228] (**) Power Button: Applying InputClass "Keyboard Defaults"
[    11.228] (II) LoadModule: "libinput"
[    11.231] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    11.238] (II) Module libinput: vendor="X.Org Foundation"
[    11.238] compiled for 1.20.8, module version = 0.30.0
[    11.238] Module class: X.Org XInput Driver
[    11.238] ABI class: X.Org XInput driver, version 24.1
[    11.238] (II) Using input driver 'libinput' for 'Power Button'
[    11.238] (**) Power Button: always reports core events
[    11.238] (**) Option "Device" "/dev/input/event1"
[    11.238] (**) Option "_source" "server/udev"
[    11.251] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    11.251] (II) event1  - Power Button: device is a keyboard
[    11.251] (II) event1  - Power Button: device removed
[    11.276] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    11.276] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    11.276] (**) Option "xkb_model" "pc105"
[    11.276] (**) Option "xkb_layout" "de"
[    11.276] (**) Option "xkb_variant" "nodeadkeys"
[    11.276] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    11.306] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    11.306] (II) event1  - Power Button: device is a keyboard
[    11.307] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    11.307] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    11.307] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    11.307] (**) Power Button: Applying InputClass "system-keyboard"
[    11.307] (**) Power Button: Applying InputClass "Keyboard Defaults"
[    11.307] (II) Using input driver 'libinput' for 'Power Button'
[    11.307] (**) Power Button: always reports core events
[    11.307] (**) Option "Device" "/dev/input/event0"
[    11.307] (**) Option "_source" "server/udev"
[    11.308] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    11.308] (II) event0  - Power Button: device is a keyboard
[    11.308] (II) event0  - Power Button: device removed
[    11.319] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    11.319] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    11.319] (**) Option "xkb_model" "pc105"
[    11.319] (**) Option "xkb_layout" "de"
[    11.319] (**) Option "xkb_variant" "nodeadkeys"
[    11.319] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    11.320] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    11.321] (II) event0  - Power Button: device is a keyboard
[    11.321] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event13)
[    11.321] (II) No input driver specified, ignoring this device.
[    11.321] (II) This device may have been added with another device file.
[    11.322] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event14)
[    11.322] (II) No input driver specified, ignoring this device.
[    11.322] (II) This device may have been added with another device file.
[    11.323] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event15)
[    11.323] (II) No input driver specified, ignoring this device.
[    11.323] (II) This device may have been added with another device file.
[    11.323] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event16)
[    11.323] (II) No input driver specified, ignoring this device.
[    11.323] (II) This device may have been added with another device file.
[    11.324] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event9)
[    11.324] (II) No input driver specified, ignoring this device.
[    11.324] (II) This device may have been added with another device file.
[    11.324] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event10)
[    11.324] (II) No input driver specified, ignoring this device.
[    11.324] (II) This device may have been added with another device file.
[    11.325] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event11)
[    11.325] (II) No input driver specified, ignoring this device.
[    11.325] (II) This device may have been added with another device file.
[    11.325] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event12)
[    11.325] (II) No input driver specified, ignoring this device.
[    11.325] (II) This device may have been added with another device file.
[    11.326] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[    11.326] (II) No input driver specified, ignoring this device.
[    11.326] (II) This device may have been added with another device file.
[    11.327] (II) config/udev: Adding input device Chicony USB keyboard (/dev/input/event2)
[    11.327] (**) Chicony USB keyboard: Applying InputClass "evdev keyboard catchall"
[    11.327] (**) Chicony USB keyboard: Applying InputClass "libinput keyboard catchall"
[    11.327] (**) Chicony USB keyboard: Applying InputClass "system-keyboard"
[    11.327] (**) Chicony USB keyboard: Applying InputClass "Keyboard Defaults"
[    11.327] (II) Using input driver 'libinput' for 'Chicony USB keyboard'
[    11.327] (**) Chicony USB keyboard: always reports core events
[    11.327] (**) Option "Device" "/dev/input/event2"
[    11.327] (**) Option "_source" "server/udev"
[    11.329] (II) event2  - Chicony USB keyboard: is tagged by udev as: Keyboard
[    11.329] (II) event2  - Chicony USB keyboard: device is a keyboard
[    11.330] (II) event2  - Chicony USB keyboard: device removed
[    11.342] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.0/0003:04F2:0603.0001/input/input2/event2"
[    11.342] (II) XINPUT: Adding extended input device "Chicony USB keyboard" (type: KEYBOARD, id 8)
[    11.342] (**) Option "xkb_model" "pc105"
[    11.342] (**) Option "xkb_layout" "de"
[    11.343] (**) Option "xkb_variant" "nodeadkeys"
[    11.343] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    11.345] (II) event2  - Chicony USB keyboard: is tagged by udev as: Keyboard
[    11.345] (II) event2  - Chicony USB keyboard: device is a keyboard
[    11.346] (II) config/udev: Adding input device Chicony USB keyboard System Control (/dev/input/event3)
[    11.346] (**) Chicony USB keyboard System Control: Applying InputClass "evdev keyboard catchall"
[    11.346] (**) Chicony USB keyboard System Control: Applying InputClass "libinput keyboard catchall"
[    11.346] (**) Chicony USB keyboard System Control: Applying InputClass "system-keyboard"
[    11.346] (**) Chicony USB keyboard System Control: Applying InputClass "Keyboard Defaults"
[    11.346] (II) Using input driver 'libinput' for 'Chicony USB keyboard System Control'
[    11.346] (**) Chicony USB keyboard System Control: always reports core events
[    11.346] (**) Option "Device" "/dev/input/event3"
[    11.346] (**) Option "_source" "server/udev"
[    11.349] (II) event3  - Chicony USB keyboard System Control: is tagged by udev as: Keyboard
[    11.349] (II) event3  - Chicony USB keyboard System Control: device is a keyboard
[    11.349] (II) event3  - Chicony USB keyboard System Control: device removed
[    11.372] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.1/0003:04F2:0603.0002/input/input3/event3"
[    11.372] (II) XINPUT: Adding extended input device "Chicony USB keyboard System Control" (type: KEYBOARD, id 9)
[    11.372] (**) Option "xkb_model" "pc105"
[    11.372] (**) Option "xkb_layout" "de"
[    11.372] (**) Option "xkb_variant" "nodeadkeys"
[    11.372] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    11.375] (II) event3  - Chicony USB keyboard System Control: is tagged by udev as: Keyboard
[    11.375] (II) event3  - Chicony USB keyboard System Control: device is a keyboard
[    11.376] (II) config/udev: Adding input device Chicony USB keyboard Consumer Control (/dev/input/event4)
[    11.376] (**) Chicony USB keyboard Consumer Control: Applying InputClass "evdev keyboard catchall"
[    11.376] (**) Chicony USB keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[    11.376] (**) Chicony USB keyboard Consumer Control: Applying InputClass "system-keyboard"
[    11.376] (**) Chicony USB keyboard Consumer Control: Applying InputClass "Keyboard Defaults"
[    11.376] (II) Using input driver 'libinput' for 'Chicony USB keyboard Consumer Control'
[    11.376] (**) Chicony USB keyboard Consumer Control: always reports core events
[    11.376] (**) Option "Device" "/dev/input/event4"
[    11.376] (**) Option "_source" "server/udev"
[    11.378] (II) event4  - Chicony USB keyboard Consumer Control: is tagged by udev as: Keyboard
[    11.378] (II) event4  - Chicony USB keyboard Consumer Control: device is a keyboard
[    11.379] (II) event4  - Chicony USB keyboard Consumer Control: device removed
[    11.426] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.1/0003:04F2:0603.0002/input/input4/event4"
[    11.426] (II) XINPUT: Adding extended input device "Chicony USB keyboard Consumer Control" (type: KEYBOARD, id 10)
[    11.426] (**) Option "xkb_model" "pc105"
[    11.426] (**) Option "xkb_layout" "de"
[    11.426] (**) Option "xkb_variant" "nodeadkeys"
[    11.426] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    11.428] (II) event4  - Chicony USB keyboard Consumer Control: is tagged by udev as: Keyboard
[    11.428] (II) event4  - Chicony USB keyboard Consumer Control: device is a keyboard
[    11.429] (II) config/udev: Adding input device Chicony USB keyboard (/dev/input/event5)
[    11.429] (II) No input driver specified, ignoring this device.
[    11.429] (II) This device may have been added with another device file.
[    11.430] (II) config/udev: Adding input device HID 1241:1122 (/dev/input/event6)
[    11.430] (**) HID 1241:1122: Applying InputClass "evdev pointer catchall"
[    11.430] (**) HID 1241:1122: Applying InputClass "libinput pointer catchall"
[    11.431] (II) Using input driver 'libinput' for 'HID 1241:1122'
[    11.431] (**) HID 1241:1122: always reports core events
[    11.431] (**) Option "Device" "/dev/input/event6"
[    11.431] (**) Option "_source" "server/udev"
[    11.487] (II) event6  - HID 1241:1122: is tagged by udev as: Mouse
[    11.488] (II) event6  - HID 1241:1122: device is a pointer
[    11.488] (II) event6  - HID 1241:1122: device removed
[    11.559] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-2/4-2:1.0/0003:1241:1122.0003/input/input7/event6"
[    11.559] (II) XINPUT: Adding extended input device "HID 1241:1122" (type: MOUSE, id 11)
[    11.559] (**) Option "AccelerationScheme" "none"
[    11.559] (**) HID 1241:1122: (accel) selected scheme none/0
[    11.559] (**) HID 1241:1122: (accel) acceleration factor: 2.000
[    11.559] (**) HID 1241:1122: (accel) acceleration threshold: 4
[    11.617] (II) event6  - HID 1241:1122: is tagged by udev as: Mouse
[    11.618] (II) event6  - HID 1241:1122: device is a pointer
[    11.619] (II) config/udev: Adding input device HID 1241:1122 (/dev/input/mouse0)
[    11.619] (II) No input driver specified, ignoring this device.
[    11.619] (II) This device may have been added with another device file.
[    11.620] (II) config/udev: Adding input device Microsoft® LifeCam HD-5000: Mi (/dev/input/event17)
[    11.620] (**) Microsoft® LifeCam HD-5000: Mi: Applying InputClass "evdev keyboard catchall"
[    11.620] (**) Microsoft® LifeCam HD-5000: Mi: Applying InputClass "libinput keyboard catchall"
[    11.620] (**) Microsoft® LifeCam HD-5000: Mi: Applying InputClass "system-keyboard"
[    11.620] (**) Microsoft® LifeCam HD-5000: Mi: Applying InputClass "Keyboard Defaults"
[    11.620] (II) Using input driver 'libinput' for 'Microsoft® LifeCam HD-5000: Mi'
[    11.620] (**) Microsoft® LifeCam HD-5000: Mi: always reports core events
[    11.620] (**) Option "Device" "/dev/input/event17"
[    11.620] (**) Option "_source" "server/udev"
[    11.622] (II) event17 - Microsoft® LifeCam HD-5000: Mi: is tagged by udev as: Keyboard
[    11.622] (II) event17 - Microsoft® LifeCam HD-5000: Mi: device is a keyboard
[    11.622] (II) event17 - Microsoft® LifeCam HD-5000: Mi: device removed
[    11.679] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1e.0/0000:03:02.2/usb2/2-1/2-1:1.0/input/input18/event17"
[    11.679] (II) XINPUT: Adding extended input device "Microsoft® LifeCam HD-5000: Mi" (type: KEYBOARD, id 12)
[    11.679] (**) Option "xkb_model" "pc105"
[    11.679] (**) Option "xkb_layout" "de"
[    11.679] (**) Option "xkb_variant" "nodeadkeys"
[    11.679] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    11.681] (II) event17 - Microsoft® LifeCam HD-5000: Mi: is tagged by udev as: Keyboard
[    11.681] (II) event17 - Microsoft® LifeCam HD-5000: Mi: device is a keyboard
[    11.682] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[    11.682] (II) No input driver specified, ignoring this device.
[    11.682] (II) This device may have been added with another device file.
[    11.691] (II) config/udev: Adding input device HID 1241:1122 (/dev/input/mouse0)
[    11.691] (II) No input driver specified, ignoring this device.
[    11.691] (II) This device may have been added with another device file.
[    11.691] (II) config/udev: removing device HID 1241:1122
[    11.692] (II) event6  - HID 1241:1122: device removed
[    11.716] (II) UnloadModule: "libinput"
[    11.717] (II) config/udev: Adding input device HID 1241:1122 (/dev/input/event6)
[    11.717] (**) HID 1241:1122: Applying InputClass "evdev pointer catchall"
[    11.717] (**) HID 1241:1122: Applying InputClass "libinput pointer catchall"
[    11.717] (II) Using input driver 'libinput' for 'HID 1241:1122'
[    11.717] (**) HID 1241:1122: always reports core events
[    11.717] (**) Option "Device" "/dev/input/event6"
[    11.717] (**) Option "_source" "server/udev"
[    11.774] (II) event6  - HID 1241:1122: is tagged by udev as: Mouse
[    11.774] (II) event6  - HID 1241:1122: device is a pointer
[    11.775] (II) event6  - HID 1241:1122: device removed
[    11.793] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-2/4-2:1.0/0003:1241:1122.0003/input/input7/event6"
[    11.793] (II) XINPUT: Adding extended input device "HID 1241:1122" (type: MOUSE, id 11)
[    11.793] (**) Option "AccelerationScheme" "none"
[    11.793] (**) HID 1241:1122: (accel) selected scheme none/0
[    11.793] (**) HID 1241:1122: (accel) acceleration factor: 2.000
[    11.793] (**) HID 1241:1122: (accel) acceleration threshold: 4
[    11.851] (II) event6  - HID 1241:1122: is tagged by udev as: Mouse
[    11.851] (II) event6  - HID 1241:1122: device is a pointer
[    11.852] (II) config/udev: removing device Chicony USB keyboard System Control
[    11.852] (II) event3  - Chicony USB keyboard System Control: device removed
[    11.866] (II) UnloadModule: "libinput"
[    11.866] (II) config/udev: Adding input device Chicony USB keyboard System Control (/dev/input/event3)
[    11.866] (**) Chicony USB keyboard System Control: Applying InputClass "evdev keyboard catchall"
[    11.867] (**) Chicony USB keyboard System Control: Applying InputClass "libinput keyboard catchall"
[    11.867] (**) Chicony USB keyboard System Control: Applying InputClass "system-keyboard"
[    11.867] (**) Chicony USB keyboard System Control: Applying InputClass "Keyboard Defaults"
[    11.867] (II) Using input driver 'libinput' for 'Chicony USB keyboard System Control'
[    11.867] (**) Chicony USB keyboard System Control: always reports core events
[    11.867] (**) Option "Device" "/dev/input/event3"
[    11.867] (**) Option "_source" "server/udev"
[    11.869] (II) event3  - Chicony USB keyboard System Control: is tagged by udev as: Keyboard
[    11.869] (II) event3  - Chicony USB keyboard System Control: device is a keyboard
[    11.869] (II) event3  - Chicony USB keyboard System Control: device removed
[    11.879] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.1/0003:04F2:0603.0002/input/input3/event3"
[    11.879] (II) XINPUT: Adding extended input device "Chicony USB keyboard System Control" (type: KEYBOARD, id 9)
[    11.879] (**) Option "xkb_model" "pc105"
[    11.879] (**) Option "xkb_layout" "de"
[    11.879] (**) Option "xkb_variant" "nodeadkeys"
[    11.879] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    11.881] (II) event3  - Chicony USB keyboard System Control: is tagged by udev as: Keyboard
[    11.882] (II) event3  - Chicony USB keyboard System Control: device is a keyboard
[    11.882] (II) config/udev: removing device Chicony USB keyboard Consumer Control
[    11.882] (II) event4  - Chicony USB keyboard Consumer Control: device removed
[    11.929] (II) UnloadModule: "libinput"
[    11.930] (II) config/udev: Adding input device Chicony USB keyboard Consumer Control (/dev/input/event4)
[    11.930] (**) Chicony USB keyboard Consumer Control: Applying InputClass "evdev keyboard catchall"
[    11.930] (**) Chicony USB keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[    11.930] (**) Chicony USB keyboard Consumer Control: Applying InputClass "system-keyboard"
[    11.930] (**) Chicony USB keyboard Consumer Control: Applying InputClass "Keyboard Defaults"
[    11.930] (II) Using input driver 'libinput' for 'Chicony USB keyboard Consumer Control'
[    11.930] (**) Chicony USB keyboard Consumer Control: always reports core events
[    11.930] (**) Option "Device" "/dev/input/event4"
[    11.930] (**) Option "_source" "server/udev"
[    11.932] (II) event4  - Chicony USB keyboard Consumer Control: is tagged by udev as: Keyboard
[    11.932] (II) event4  - Chicony USB keyboard Consumer Control: device is a keyboard
[    11.932] (II) event4  - Chicony USB keyboard Consumer Control: device removed
[    11.967] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.1/0003:04F2:0603.0002/input/input4/event4"
[    11.967] (II) XINPUT: Adding extended input device "Chicony USB keyboard Consumer Control" (type: KEYBOARD, id 10)
[    11.967] (**) Option "xkb_model" "pc105"
[    11.967] (**) Option "xkb_layout" "de"
[    11.967] (**) Option "xkb_variant" "nodeadkeys"
[    11.967] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    11.977] (II) event4  - Chicony USB keyboard Consumer Control: is tagged by udev as: Keyboard
[    11.977] (II) event4  - Chicony USB keyboard Consumer Control: device is a keyboard
[    11.978] (II) config/udev: Adding input device Chicony USB keyboard (/dev/input/event5)
[    11.978] (II) No input driver specified, ignoring this device.
[    11.978] (II) This device may have been added with another device file.
[    11.978] (II) config/udev: removing device Chicony USB keyboard
[    11.978] (II) event2  - Chicony USB keyboard: device removed
[    11.986] (II) UnloadModule: "libinput"
[    11.989] (II) config/udev: Adding input device Chicony USB keyboard (/dev/input/event2)
[    11.989] (**) Chicony USB keyboard: Applying InputClass "evdev keyboard catchall"
[    11.989] (**) Chicony USB keyboard: Applying InputClass "libinput keyboard catchall"
[    11.989] (**) Chicony USB keyboard: Applying InputClass "system-keyboard"
[    11.989] (**) Chicony USB keyboard: Applying InputClass "Keyboard Defaults"
[    11.989] (II) Using input driver 'libinput' for 'Chicony USB keyboard'
[    11.989] (**) Chicony USB keyboard: always reports core events
[    11.989] (**) Option "Device" "/dev/input/event2"
[    11.989] (**) Option "_source" "server/udev"
[    11.991] (II) event2  - Chicony USB keyboard: is tagged by udev as: Keyboard
[    11.991] (II) event2  - Chicony USB keyboard: device is a keyboard
[    11.991] (II) event2  - Chicony USB keyboard: device removed
[    11.993] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.0/0003:04F2:0603.0001/input/input2/event2"
[    11.993] (II) XINPUT: Adding extended input device "Chicony USB keyboard" (type: KEYBOARD, id 8)
[    11.993] (**) Option "xkb_model" "pc105"
[    11.993] (**) Option "xkb_layout" "de"
[    11.993] (**) Option "xkb_variant" "nodeadkeys"
[    11.993] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    11.998] (II) event2  - Chicony USB keyboard: is tagged by udev as: Keyboard
[    11.999] (II) event2  - Chicony USB keyboard: device is a keyboard
[    11.999] (II) config/udev: removing device Microsoft® LifeCam HD-5000: Mi
[    12.000] (II) event17 - Microsoft® LifeCam HD-5000: Mi: device removed
[    12.036] (II) UnloadModule: "libinput"
[    12.037] (II) config/udev: Adding input device Microsoft® LifeCam HD-5000: Mi (/dev/input/event17)
[    12.037] (**) Microsoft® LifeCam HD-5000: Mi: Applying InputClass "evdev keyboard catchall"
[    12.037] (**) Microsoft® LifeCam HD-5000: Mi: Applying InputClass "libinput keyboard catchall"
[    12.037] (**) Microsoft® LifeCam HD-5000: Mi: Applying InputClass "system-keyboard"
[    12.037] (**) Microsoft® LifeCam HD-5000: Mi: Applying InputClass "Keyboard Defaults"
[    12.037] (II) Using input driver 'libinput' for 'Microsoft® LifeCam HD-5000: Mi'
[    12.037] (**) Microsoft® LifeCam HD-5000: Mi: always reports core events
[    12.037] (**) Option "Device" "/dev/input/event17"
[    12.037] (**) Option "_source" "server/udev"
[    12.039] (II) event17 - Microsoft® LifeCam HD-5000: Mi: is tagged by udev as: Keyboard
[    12.039] (II) event17 - Microsoft® LifeCam HD-5000: Mi: device is a keyboard
[    12.039] (II) event17 - Microsoft® LifeCam HD-5000: Mi: device removed
[    12.063] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1e.0/0000:03:02.2/usb2/2-1/2-1:1.0/input/input18/event17"
[    12.063] (II) XINPUT: Adding extended input device "Microsoft® LifeCam HD-5000: Mi" (type: KEYBOARD, id 12)
[    12.063] (**) Option "xkb_model" "pc105"
[    12.063] (**) Option "xkb_layout" "de"
[    12.063] (**) Option "xkb_variant" "nodeadkeys"
[    12.063] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    12.065] (II) event17 - Microsoft® LifeCam HD-5000: Mi: is tagged by udev as: Keyboard
[    12.065] (II) event17 - Microsoft® LifeCam HD-5000: Mi: device is a keyboard
[    20.515] (II) NVIDIA(GPU-0): Display (LG Electronics L226WTQ (DFP-0)) does not support
[    20.526] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[    26.543] (II) NVIDIA(GPU-0): Display (LG Electronics L226WTQ (DFP-0)) does not support
[    26.543] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[    26.871] (II) NVIDIA(GPU-0): Display (LG Electronics L226WTQ (DFP-0)) does not support
[    26.871] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[    26.910] (II) NVIDIA(GPU-0): Display (LG Electronics L226WTQ (DFP-0)) does not support
[    26.910] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.


Offline Lehmeier

  • Sr. Mitglied
  • ****
  • Beiträge: 252
  • Dankeschön: 2 mal
  • Karma: +0/-0
  • Desktop: KDE
  • Prozessor: 2.5 GHZ Dual Core
  • Skill: Anfänger
  • Zweig: Stable
Re: Externe Festplatten werden sehr langsam erkannt
« Antwort #23 am: 17. September 2020, 11:22:05 »
Inzwischen funktioniert es wieder einwandfrei, anscheinend ist der Fehler mit einem Update behoben worden.

MfG R.Lehmeier